Wedge wire screen filter slot filter pipe valid in panel,basket,tube etc
Wedge wire screen filter also named slot mesh filter element is made of stainless steel wedge wire screen with filter rating from 15 to 800 micron.Water treatment filter is welded with stainless steel wedge shaped wire and support bar.The filter is divided into filter screen,filter basket and filter element.
The ” triangle shape,” which is the biggest feature of the Wedge Wire Screen, means that as solids pass through, the contact points are small and the tips of the slits are widened, such that solids are less likely to clog, and even they do clog, there is a strong backwashing effect, resulting in excellent maintainability.
Application
-Petrochemical industry: catalytic reaction engineering, hydrogen desulfurization, stupid ethane dehydrogenation, ammonia conversion, ISOM.
-Water treatment
-Mineral processing
-Paper making
-Food and drinking industry
Specification
Material: low carbon galvanized wire, mild steel wire, stainless steel wire (SS302, SS304, SS304L, SS316, SS316L, etc.)
Slot opening: 0.05mm, 0.08mm, 0.10mm, 0.15mm, 0.2mm, 0.3mm, 0.6mm, etc.
|
Wedge wire |
||||||||
| width(mm) |
1.50 |
1.50 |
2.30 |
2.30 |
1.80 |
3.00 |
3.70 |
3.30 |
| height(mm) |
2.20 |
2.50 |
2.70 |
3.60 |
4.30 |
4.70 |
5.60 |
6.30 |
|
Support wire |
Round wire |
|||||
| width(mm) |
2.30 |
2.30 |
3.00 |
3.70 |
3.30 |
Ø2.5–Ø5mm |
| height(mm) |
2.70 |
3.60 |
4.70 |
5.60 |
6.30 |
—- |
| Filtration rate | 15-800μm |
| OD | 25.4-1200mm |
| Length | 6 meter(no splice) |
| Shapes | Square, rectangle, disc, basket, tube, cone. |
| The slot | 0.1mm-45mm |
| Wire | 2.0mm*30.mm,3.0mm*4.6mm,3.0mm*5.0mm |
| The rods | 3.8mm/22, 3.8mm/32, 3.8mm/48, 3.8mm/50 |
| Height | 6-40 mm |
| Rod | round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire) |
| Styles of connection | by welding or by threaded male/female coupling |
| Filter type | from outside to inside or inside to outside |
| Hanke filiter can be customized by your demands | |
| Wire Width | Wire Height | Relief Angle | Typical Support Rods | |
| 30V | .030″ | .06″ | 10 | .125″ round |
| 45V | .045″ | .09″ | 10 | .125″ round |
| 63V | .063″ | .11″ | 13 | .156″ round |
| 69U | .069″ | .17″ | 8 | .075″ x 1″ bar |
| 93V | .093″ | .15″ | 13 | .25″ round or .075″ bar |
| 93U | .093″ | .17″ | 5 | .25″ or .38″ round |
| 125V | .125″ | .20″ | 13 | .38″ round |
